Life Cycle Assessment and eco-efficiency of prospective, flexible, tandem organic photovoltaic module

Vorschaubild nicht verfügbar
Autor:innen
Nisato, Giovanni
Autor:in (Körperschaft)
Publikationsdatum
2016
Typ der Arbeit
Studiengang
Sammlung
Institut für Ecopreneurship
Komplettanzeige
Typ
01A - Beitrag in wissenschaftlicher Zeitschrift
Herausgeber:innen
Herausgeber:in (Körperschaft)
Betreuer:in
Übergeordnetes Werk
Solar Energy
Themenheft
DOI der Originalpublikation
https://doi.org/10.1016/j.solener.2016.08.025
URI
http://hdl.handle.net/11654/23633
Link
http://ac.els-cdn.com/S0038092X16303620/1-s2.0-S0038092X16303620-main.pdf?_tid=fcdc97b4-b325-11e6-b6e4-00000aab0f26&acdnat=1480088821_847819eae37f5dbb3b07b6e23c6618f8
Reihe / Serie
Reihennummer
Jahrgang / Band
Ausgabe / Nummer
Seiten / Dauer
317-327
Patentnummer
Verlag / Herausgebende Institution
Elsevier
Verlagsort / Veranstaltungsort
Auflage
Version
Programmiersprache
Abtretungsempfänger:in
Praxispartner:in/Auftraggeber:in
Zusammenfassung
Organic photovoltaic technology has reached a sufficient maturity to enable commercially viable products for integration into buildings with power conversion efficiencies up to about 5%, for example, using a roll- to-roll (R2R) processing of single bulk heterojunction devices technology. This paper reports on a Life Cycle Assessment (LCA) and eco-efficiency analysis of prospective tandem organic photovoltaic (OPV) modules which have been manufactured to the most part in pilot environments. To realistically model the LCA and eco-efficiency a power conversion efficiency of both 10% and a more modest 8% were used with lifespan scenarios of 15 and 20 years. The tandem OPV modules modelled in this study have: a cell stack consisting of new advanced materials such as nano-sized zinc oxide, nano-sized silver, and semiconductor polymers; a light management structure; and new flexible PET based encapsulation with organic and inorganic barriers. This tandem technology was modelled assuming an industrialized production based on real and estimated resource consumption and pollution data from an existing roll-to-roll pilot OPV plant and from material suppliers together with projected costs. Established multi-silicon (multi-Si) and cadmium-telluride (CdTe) photovoltaics were taken to benchmark the environmental impacts in produc- tion and the expected levelized costs of electricity. The results of the modelling show that the production of 1 m 2 tandem OPV module represents only approximately 3–10% of the impacts of 1 m 2 of the bench- mark multi-Si or CdTe modules when the global warming potential (GWP), cumulative energy demand (CED), eco-toxicity, and metal depletion environmental impacts are considered. The results also show the energy payback time of a tandem OPV at facade is only 18–55% of that of the benchmarks, and the GWP is just 12–60% of that of the benchmarks. An eco-efficiency comparison indicates that, for applica- tions where photovoltaic modules cannot be optimally oriented towards the sun, a flexible tandem OPV might be a superior alternative to multi-Si and CdTe modules.
Schlagwörter
Fachgebiet (DDC)
Projekt
Veranstaltung
Startdatum der Ausstellung
Enddatum der Ausstellung
Startdatum der Konferenz
Enddatum der Konferenz
Datum der letzten Prüfung
ISBN
ISSN
0375-9865
1471-1257
0038-092X
Sprache
Englisch
Während FHNW Zugehörigkeit erstellt
Ja
Publikationsstatus
Veröffentlicht
Begutachtung
Peer-Review der ganzen Publikation
Open Access-Status
Lizenz
Zitation
HENGEVOSS, Dirk, Corinne BAUMGARTNER, Christoph HUGI und Giovanni NISATO, 2016. Life Cycle Assessment and eco-efficiency of prospective, flexible, tandem organic photovoltaic module. Solar Energy. 2016. S. 317–327. DOI 10.1016/j.solener.2016.08.025. Verfügbar unter: http://hdl.handle.net/11654/23633
Komplettanzeige