Gössi, Angelo
E-Mail-Adresse
Geburtsdatum
Projekt
Organisationseinheiten
Berufsbeschreibung
Nachname
Vorname
Name
Suchergebnisse
Mass transfer analysis and kinetic modeling for process design of countercurrent membrane supported reactive extraction of carboxylic acids
2021, Schuur, Boelo, Gössi, Angelo, Riedl, Wolfgang
Countercurrent membrane supported reactive extraction (MSRE) was studied for removal of carboxylic acids from aqueous streams with a PTFE capillary membrane. Analysis of the mass transfer rates was per- formed to support modeling of the process. Total mass transfer coefficients ranging from 2.0 10-7 to 4.0 10-7 m/s were obtained when extracting lactic acid with 20 wt% tri-N-octyl amine in 1-decanol with membrane thicknesses of 260 mm and 80 mm. The limiting mass transfer resistance in all experiments was in the membrane phase. The developed model based on mass transfer and reaction in parallel allows to predict countercurrent extraction. Experimental validation with 5, 7 and 12 m long membrane modules showed excellent accordance for two acids, validating the model simulations. Simulated membrane con- tactor lengths required for single, two and three countercurrent stages varied between 10 and 39 m/stage for lactic, mandelic, succinic, itaconic and citric acid, depending on acid, membrane, and diluent.
In-situ recovery of carboxylic acids from fermentation broths through membrane supported reactive extraction using membrane modules with improved stability
2020-06-15, Gössi, Angelo, Burgener, Florian, Kohler, David, Urso, Alessandro, Kolvenbach, Boris, Riedl, Wolfgang
Membrane supported reactive extraction (MSE) coupled to back-extraction (MSBE) using a new type of Teflon (PTFE) capillary membrane contactor was studied for the in-situ removal of carboxylic acids from aqueous streams, e.g. fermentation broths. The use of microporous membranes as extraction interface helps avoiding emulsification problems, allows the use of extreme phase ratios, and protects microorganisms, as they are less affected by solvent toxicity during in-situ extractions. The use of PTFE capillary membranes is suitable for long-term use due its high chemical and thermal stability. A simple toxicity screening identified n-decanol with tri n-octyl amine (TOA) as a suitable solvent. MSE experiments were performed using membrane contactors (0.005 m2 to 0.15 m2), working with solvent to feed phase ratios down to 1:40 (mass based). The in-situ removal of lactic acid out of fermentation broths using lactobacillus plantarum led to a glucose conversion rate of 80 mol%. Additionally, a concentration factor up to 7.8 could be shown during back-extraction.