Usability tests on the temperature-induced changes in magnetic hysteresis during steel production
Lade...
Autor:in (Körperschaft)
Publikationsdatum
2023
Typ der Arbeit
Studiengang
Typ
04B - Beitrag Konferenzschrift
Herausgeber:innen
Herausgeber:in (Körperschaft)
Betreuer:in
Übergeordnetes Werk
2023 International workshop on impedance spectroscopy (IWIS)
Themenheft
DOI der Originalpublikation
Link
Reihe / Serie
Reihennummer
Jahrgang / Band
Ausgabe / Nummer
Seiten / Dauer
115-118
Patentnummer
Verlag / Herausgebende Institution
IEEE
Verlagsort / Veranstaltungsort
Chemnitz
Auflage
Version
Programmiersprache
Abtretungsempfänger:in
Praxispartner:in/Auftraggeber:in
Zusammenfassung
This paper presents an inductive measuring system using a two-pancake coil setup for monitoring the electromagnetic properties of steel sheets. An experimental setup was developed to perform measurements on cooling sheet metal samples during real structural transformations. Additional to the experiments with hot steel sheets, a simulation in COMSOL Multiphysics was used to validate the measurement results. The experiments conducted with the cooling material confirmed the suitability of the measurement system for the application described. The results obtained in this work show that by evaluating the phase shift between the exciting magnetic field H and the induction B, the structural transformation can be reliably monitored. In this work, a phase shift of 2 degrees was measured when a steel sheet was cooled by about 200 degrees Celsius.
Schlagwörter
Temperature measurement, Temperature sensors, Spectroscopy, Magnetic field measurement, Cooling, Steel, Reliability, in-situ evaluation, sheet rolling mill, magnetic analysis, alternating current characterization, eddy current sensor, inductive sensor, non-destructive testing
Fachgebiet (DDC)
Veranstaltung
International Workshop on Impedance Spectroscopy (IWIS)
Startdatum der Ausstellung
Enddatum der Ausstellung
Startdatum der Konferenz
26.09.2023
Enddatum der Konferenz
29.09.2023
Datum der letzten Prüfung
ISBN
979-8-3503-5895-7
979-8-3503-5896-4
979-8-3503-5896-4
ISSN
Sprache
Englisch
Während FHNW Zugehörigkeit erstellt
Nein
Zukunftsfelder FHNW
Publikationsstatus
Veröffentlicht
Begutachtung
Peer-Review der ganzen Publikation
Open Access-Status
Closed
Lizenz
Zitation
Simoneit, M., Brodmann, J., Schulze, S., Hennig, A., & Himmel, J. (2023). Usability tests on the temperature-induced changes in magnetic hysteresis during steel production. 2023 International Workshop on Impedance Spectroscopy (IWIS), 115–118. https://doi.org/10.1109/IWIS61214.2023.10302817