lnstitut für Sensorik und Elektronik
Dauerhafte URI für die Sammlunghttps://irf.fhnw.ch/handle/11654/28068
Listen
4 Ergebnisse
Ergebnisse nach Hochschule und Institut
Publikation Coated soot particles with tunable, well-controlled properties generated in the laboratory with a miniCAST BC and a micro smog chamber(Elsevier, 28.05.2021) Ess, Michaela N.; Bertò, Michele; Keller, Alejandro; Gysel, Martin; Vasilatou, KonstantinaA Micro Smog Chamber (MSC) was coupled for the first time with a miniCAST 5201 Type BC combustion generator with the aim to produce a series of stable and reproducible model aerosols simulating the physical properties of combustion particles present in ambient air. With this setup it was possible to generate particles ranging from “fresh” soot (single scattering albedo SSA≤0.05, absorption Ångström exponent AAE close to 1, high EC/TC mass fraction (approximately 90%) and mobility diameter typically <100 nm) to “aged” soot with different amounts of organic coating. The “aged” soot particles could grow up to 200 nm and exhibited high SSA (up to 0.7 at λ = 870 nm), an increased AAE (up to 1.7) and low EC/TC mass fraction (down to <10%). The ageing was achieved by coating the soot particles with increasing amounts of secondary organic matter (SOM) formed by the photo-oxidation of α-pinene or mesitylene in the MSC. Thereby, the SSA and AAE increased with coating thickness, while the EC/TC mass fraction decreased. Over the experimental period of 2 h, the generation of the “aged” soot aerosols was stable with a standard deviation in particle size and number concentration of <1% and <6%, respectively. The day-to-day reproducibility was also satisfactory: with α-pinene as SOM precursor the variability (standard deviation) in particle size was <2% and in the AAE and SSA < 6%. Particle number concentrations up to 106 cm−3 and mass concentrations up to 15 mg/m3 (depending on particle size and SOM amount) could be generated, much higher than what has been reported with other oxidation flow reactors. The generated carbonaceous aerosols could find useful applications in the field of aerosol instrument calibration, particularly in the standardization of filter-based absorption photometers under controlled conditions.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation The organic coating unit, an all-in-one system for reproducible generation of secondary organic aerosol(22.06.2022) Keller, Alejandro; Specht, Patrick; Steigmeier, Peter; Kalbermatter, Daniel; Hammer, Tobias; Vasilatou, Konstantina; Wolfer, Kate; Resch, Julian; Kalberer, Markus06 - PräsentationPublikation The organic coating unit, an all-in-one system for reproducible generation of secondary organic aerosol(06.09.2022) Keller, Alejandro; Kalbermatter, Daniel; Specht, Patrick; Steigmeier, Peter; Wolfer, Katherin; Resch, Julian; Kalberer, Markus; Hammer, Tobias; Vasilatou, Konstantina06 - PräsentationPublikation The organic coating unit, an all-in-one system for reproducible generation of secondary organic matter aerosol(Taylor & Francis, 18.08.2022) Keller, Alejandro; Kalbermatter, Daniel M.; Wolfer, Kate; Specht, Patrick; Steigmeier, Peter; Resch, Julian; Kalberer, Markus; Hammer, Tobias; Vasilatou, KonstantinaWe report on a novel automated oxidation flow reactor to generate a wide variety of organic aerosol samples. The instrument is equipped with a humidifier, a dosing system for volatile organic precursors and an oxidation flow reactor (OFR) for generation of secondary organic matter (SOM). The instrument, known as organic coating unit (OCU), can produce homogeneously nucleated SOM particles or, used in combination with a standard combustion generator (e.g., a diffusion flame soot generator or any other seed particle), particles coated with a controlled amount of SOM. The physical and chemical properties of the generated particles can be controlled in a simple manner by selecting through a touch-screen target values for parameters, such as organic gaseous precursor concentration, humidity, and UV (ultraviolet) light intensity. Parameters and measured quantities are automatically stored in text files for easy export and analysis. Furthermore, we provide stable operation conditions and characterize the physicochemical properties of the generated aerosols with an array of methods, including transmission electron microscopy (TEM), thermal-optical analysis and liquid chromatography coupled with mass spectrometry (LC-MS). This all-in-one instrument is robust, compact, portable, and user-friendly, making it ideal for laboratory or field-based aerosol studies.01A - Beitrag in wissenschaftlicher Zeitschrift