Wildhaber, Reto

Lade...
Profilbild
E-Mail-Adresse
Geburtsdatum
Projekt
Organisationseinheiten
Berufsbeschreibung
Nachname
Wildhaber
Vorname
Reto
Name
Wildhaber, Reto

Suchergebnisse

Gerade angezeigt 1 - 6 von 6
  • Publikation
    Toward a novel semi‐invasive activation mapping tool for the diagnosis of supraventricular arrhythmias from the esophagus
    (Wiley, 2019) Sweda, Romy; Wildhaber, Reto; Mortier, Simone; Bruegger, Dominik; Niederhauser, Thomas; Goette, Josef; Jacomet, Marcel; Tanner, Hildegard; Haeberlin, Andreas [in: Annals of Noninvasive Electrocardiology]
    Supraventricular arrhythmia diagnosis using the surface electrocardiogram (sECG) is often cumbersome due to limited atrial signal quality. In some instances, use of esophageal electrocardiography (eECG) may facilitate the diagnosis. Here, we present a novel approach to reconstruct cardiac activation maps from eECG recordings.
    01A - Beitrag in wissenschaftlicher Zeitschrift
  • Publikation
    Pseudo asynchronous level crossing ADC for ECG signal acquisition
    (IEEE, 2017) Thanks, Marisa; Niederhauser, Thomas; Haeberlin, Andreas; Wildhaber, Reto; Vogel, Rolf; Goette, Josef; Jacomet, Marcel [in: IEEE Transactions on Biomedical Circuits and Systems]
    A new pseudo asynchronous level crossing analogue-to-digital converter (ADC) architecture targeted for low-power, implantable, long-term biomedical sensing applications is presented. In contrast to most of the existing asynchronous level crossing ADC designs, the proposed design has no digital-to-analogue converter (DAC) and no continuous time comparators. Instead, the proposed architecture uses an analogue memory cell and dynamic comparators. The architecture retains the signal activity dependent sampling operation by generating events only when the input signal is changing. The architecture offers the advantages of smaller chip area, energy saving and fewer analogue system components. Beside lower energy consumption the use of dynamic comparators results in a more robust performance in noise conditions. Moreover, dynamic comparators make interfacing the asynchronous level crossing system to synchronous processing blocks simpler. The proposed ADC was implemented in 0.35 μm complementary metal-oxide-semiconductor (CMOS) technology, the hardware occupies a chip area of 0.0372 mm 2 and operates from a supply voltage of 1.8 V to 2.4 V. The ADC's power consumption is as low as 0.6 μW with signal bandwidth from 0.05 Hz to 1 kHz and achieves an equivalent number of bits (ENOB) of up to 8 bits.
    01A - Beitrag in wissenschaftlicher Zeitschrift
  • Publikation
    Markers for silent atrial fibrillation in esophageal long-term electrocardiography
    (Elsevier, 2016) Haeberlin, Andreas; Lacheta, Lucca; Niederhauser, Thomas; Marisa, Thanks; Wildhaber, Reto; Goette, Josef; Jacomet, Marcel; Seiler, Jens; Fuhrer, Juerg; Roten, Laurent; Tanner, Hildegard; Vogel, Rolf [in: Journal of Electrocardiology]
    Purpose Paroxysmal atrial fibrillation (PAF) often remains undiagnosed. Long-term surface ECG is used for screening, but has limitations. Esophageal ECG (eECG) allows recording high quality atrial signals, which were used to identify markers for PAF.
    01A - Beitrag in wissenschaftlicher Zeitschrift
  • Publikation
    A baseline wander tracking system for artifact rejection in long-term electrocardiography
    (IEEE, 2016) Niederhauser, Thomas; Marisa, Thanks; Kohler, Lukas; Haeberlin, Andreas; Wildhaber, Reto; Abächerli, Roger; Goette, Josef; Jacomet, Marcel; Vogel, Rolf [in: IEEE Transactions on Biomedical Circuits and Systems]
    Long-term electrocardiogram (ECG) signals might suffer from relevant baseline disturbances during physical activity. Motion artifacts in particular are more pronounced with dry surface or esophageal electrodes which are dedicated to prolonged ECG recording. In this paper we present a method called baseline wander tracking (BWT) that tracks and rejects strong baseline disturbances and avoids concurrent saturation of the analog front-end. The proposed algorithm shifts the baseline level of the ECG signal to the middle of the dynamic input range. Due to the fast offset shifts, that produce much steeper signal portions than the normal ECG waves, the true ECG signal can be reconstructed offline and filtered using computationally intensive algorithms. Based on Monte Carlo simulations we observed reconstruction errors mainly caused by the non-linearity inaccuracies of the DAC. However, the signal to error ratio of the BWT is higher compared to an analog front-end featuring a dynamic input ranges above 15 mV if a synthetic ECG signal was used. The BWT is additionally able to suppress (electrode) offset potentials without introducing long transients. Due to its structural simplicity, memory efficiency and the DC coupling capability, the BWT is dedicated to high integration required in long-term and low-power ECG recording systems.
    01A - Beitrag in wissenschaftlicher Zeitschrift
  • Publikation
    Bufferless compression of asynchronously sampled ECG signals in cubic hermitian vector space
    (IEEE, 2015) Thanks, Marisa; Niederhauser, Thomas; Haeberlin, Andreas; Wildhaber, Reto; Vogel, Rolf; Jacomet, Marcel; Goette, Josef [in: IEEE Transactions on Biomedical Engineering]
    Asynchronous level crossing sampling analog-to-digital converters (ADCs) are known to be more energy efficient and produce fewer samples than their equidistantly sampling counterparts. However, as the required threshold voltage is lowered, the number of samples and, in turn, the data rate and the energy consumed by the overall system increases. In this paper, we present a cubic Hermitian vector-based technique for online compression of asynchronously sampled electrocardiogram signals. The proposed method is computationally efficient data compression. The algorithm has complexity O(n), thus well suited for asynchronous ADCs. Our algorithm requires no data buffering, maintaining the energy advantage of asynchronous ADCs. The proposed method of compression has a compression ratio of up to 90% with achievable percentage root-mean-square difference ratios as a low as 0.97. The algorithm preserves the superior feature-to-feature timing accuracy of asynchronously sampled signals. These advantages are achieved in a computationally efficient manner since algorithm boundary parameters for the signals are extracted a priori.
    01A - Beitrag in wissenschaftlicher Zeitschrift
  • Publikation
    Graphics-processor-unit-based parallelization of optimized baseline wander filtering algorithms for long-term electrocardiography
    (IEEE, 2015) Niederhauser, Thomas; Wyss-Balmer, Thomas; Haeberlin, Andreas; Marisa, Thanks; Wildhaber, Reto; Goette, Josef; Jacomet, Marcel; Vogel, Rolf [in: IEEE Transactions on Biomedical Engineering]
    Long-term electrocardiogram (ECG) often suffers from relevant noise. Baseline wander in particular is pronounced in ECG recordings using dry or esophageal electrodes, which are dedicated for prolonged registration. While analog high-pass filters introduce phase distortions, reliable offline filtering of the baseline wander implies a computational burden that has to be put in relation to the increase in signal-to-baseline ratio (SBR). Here, we present a graphics processor unit (GPU)-based parallelization method to speed up offline baseline wander filter algorithms, namely the wavelet, finite, and infinite impulse response, moving mean, and moving median filter. Individual filter parameters were optimized with respect to the SBR increase based on ECGs from the Physionet database superimposed to autoregressive modeled, real baseline wander. A Monte-Carlo simulation showed that for low input SBR the moving median filter outperforms any other method but negatively affects ECG wave detection. In contrast, the infinite impulse response filter is preferred in case of high input SBR. However, the parallelized wavelet filter is processed 500 and four times faster than these two algorithms on the GPU, respectively, and offers superior baseline wander suppression in low SBR situations. Using a signal segment of 64 mega samples that is filtered as entire unit, wavelet filtering of a seven-day high-resolution ECG is computed within less than 3 s. Taking the high filtering speed into account, the GPU wavelet filter is the most efficient method to remove baseline wander present in long-term ECGs, with which computational burden can be strongly reduced.
    01A - Beitrag in wissenschaftlicher Zeitschrift