Effect of printing parameters on mechanical performance of material-extrusion 3D-printed PEEK specimens at the point-of-care
Autor:in (Körperschaft)
Publikationsdatum
17.01.2023
Typ der Arbeit
Studiengang
Typ
01A - Beitrag in wissenschaftlicher Zeitschrift
Herausgeber:innen
Herausgeber:in (Körperschaft)
Betreuer:in
Übergeordnetes Werk
Applied Sciences
Themenheft
Recent Trends on the Mechanical Properties of Additive Manufacturing
DOI der Originalpublikation
Link
Reihe / Serie
Reihennummer
Jahrgang / Band
13
Ausgabe / Nummer
3
Seiten / Dauer
1-15
Patentnummer
Verlag / Herausgebende Institution
MDPI
Verlagsort / Veranstaltungsort
Auflage
Version
Programmiersprache
Abtretungsempfänger:in
Praxispartner:in/Auftraggeber:in
Zusammenfassung
Additive manufacturing (AM) of polyetheretherketone (PEEK) biomaterials using the material-extrusion (MEX) method has been studied for years. Because of the challenging manufacturing process, precisely controlling printing parameters is crucial. This study aimed to investigate the effects of printing parameters such as orientation and position of printing on mechanical properties. Thus, 34 samples were printed using PEEK filament and the MEX process. Samples were divided into two main groups (A,B) according to their printing orientations (A: groups 1–3) and positions on the build plate (B: groups 4–8). Mechanical tensile tests were performed to evaluate the effects of different printing orientations and positions on mechanical properties. The means of the tensile modulus in samples 3D-printed in XY (group 1), XZ (group 2), and ZX (group 3) orientations were not significantly different (p-value = 0.063). Groups 1 and 2 had smaller distributions than group 3 in the means of tensile strength. The t-test showed that the overall means of the measurements in groups 4–8 did not differ significantly (p-value = 0.315). The tensile tests indicated that printing in vertical and horizontal orientations had no significant influence on mechanical properties. There were no significant differences in mechanical strength between top/bottom printed samples in five different lateral positions. Reliability of printing with good mechanical properties could be a step forward to manufacturing patient-specific implants.
Schlagwörter
Fachgebiet (DDC)
540 - Chemie
Veranstaltung
Startdatum der Ausstellung
Enddatum der Ausstellung
Startdatum der Konferenz
Enddatum der Konferenz
Datum der letzten Prüfung
ISBN
ISSN
2076-3417
Sprache
Englisch
Während FHNW Zugehörigkeit erstellt
Ja
Zukunftsfelder FHNW
Publikationsstatus
Veröffentlicht
Begutachtung
Peer-Review der ganzen Publikation
Open Access-Status
Gold
Lizenz
Zitation
ZAREAN, Paridokht, Parichehr ZAREAN, Michael DE WILD, Florian M. THIERINGER, Neha SHARMA, Daniel SEILER und Patrick MALGAROLI, 2023. Effect of printing parameters on mechanical performance of material-extrusion 3D-printed PEEK specimens at the point-of-care. Applied Sciences. 17 Januar 2023. Bd. 13, Nr. 3, S. 1–15. DOI 10.3390/app13031230. Verfügbar unter: https://doi.org/10.26041/fhnw-5215