Study on the ignitability of a high-pressure direct-injected methane jet using a diesel pilot, a glow-plug, and a pre-chamber
Lade...
Autor:in (Körperschaft)
Publikationsdatum
29.09.2021
Typ der Arbeit
Studiengang
Typ
01A - Beitrag in wissenschaftlicher Zeitschrift
Herausgeber:innen
Herausgeber:in (Körperschaft)
Betreuer:in
Übergeordnetes Werk
International Journal of Engine Research
Themenheft
DOI der Originalpublikation
Link
Reihe / Serie
Reihennummer
Jahrgang / Band
24
Ausgabe / Nummer
2
Seiten / Dauer
360-372
Patentnummer
Verlag / Herausgebende Institution
SAGE
Verlagsort / Veranstaltungsort
Auflage
Version
Programmiersprache
Abtretungsempfänger:in
Praxispartner:in/Auftraggeber:in
Zusammenfassung
Natural gas is a promising alternative fuel for internal combustion engines, it allows for a reduction of engine-out emissions without impairing high engine efficiencies. Although this approach is already utilized from small to large engine classes, it is almost exclusively based on the combustion of a premixed, homogeneous charge. For ignition, small engines use standard spark-plugs or pre-chambers, while large and lean-operated engines use pre-chambers and pilot injections. Direct high-pressure gas injection is a more recent, alternative way to operate gas engines which offers benefits compared to premixed operation such as high compression ratio, high combustion pressures, lean operation, quantity regulation, among others. However, in contrast to diesel direct injection, the compression temperatures are too low for the auto-ignition of the gas jets. Therefore, an additional ignition system is required, usually a pilot injection system is used. In this study, the usability and performance of three ignition strategies for direct injected high-pressure gas jets have been investigated in an optically accessible test-rig that is able to operate at engine-like conditions. The first type of ignition system is a pilot injection with a liquid fuel, the second is a glow-plug located near the main gas jet, and the third system is a pre-chamber with a nozzle hole aimed at the main gas jet. Results show that all three strategies are feasible options under the studied conditions. Ignition by a pilot fuel injection is a safe and reliable way to ignite the main fuel. The glow-plug is less reliable and leads to high cycle-to-cycle variation. The best option in the present study is the pre-chamber, it is very reliable, delivers the highest peak cylinder pressure and exhibits the lowest cyclic variability. The good performance is attributed to the intense mixing of the main gas jet with the hot jet exiting the pre-chamber.
Schlagwörter
Veranstaltung
Startdatum der Ausstellung
Enddatum der Ausstellung
Startdatum der Konferenz
Enddatum der Konferenz
Datum der letzten Prüfung
ISBN
ISSN
1468-0874
2041-3149
2041-3149
Sprache
Englisch
Während FHNW Zugehörigkeit erstellt
Ja
Zukunftsfelder FHNW
Publikationsstatus
Veröffentlicht
Begutachtung
Peer-Review der ganzen Publikation
Open Access-Status
Closed
Lizenz
Zitation
Vera-Tudela, W., Schneider, B., Wüthrich, S., & Herrmann, K. (2021). Study on the ignitability of a high-pressure direct-injected methane jet using a diesel pilot, a glow-plug, and a pre-chamber. International Journal of Engine Research, 24(2), 360–372. https://doi.org/10.1177/14680874211048144