Corvini, Philippe
E-Mail-Adresse
Geburtsdatum
Projekt
Organisationseinheiten
Berufsbeschreibung
Nachname
Vorname
Name
Suchergebnisse
Assessing the biodegradation of btex and stress response in a bio-permeable reactive barrier using compound-specific isotope analysis
2022-07-20, Chen, Tianyu, Wu, Yan, Wang, Jinnan, Corvini, Philippe
By using compound-specific isotope analysis (CSIA) in combination with high-throughput sequencing analysis (HTS), we successfully evaluated the benzene and toluene biodegradation in a bio-permeable reactive barrier (bio-PRB) and the stress response of the microbial community. Under stress conditions, a greater decline in the biodegradation rate of BTEX was observed compared with the apparent removal rate. Both an increase in the influent concentration and the addition of trichloroethylene (TCE) inhibited benzene biodegradation, while toluene biodegradation was inhibited by TCE. Regarding the stress response, the relative abundance of the dominant bacterial community responsible for the biodegradation of BTEX increased with the influent concentration. However, the dominant bacterial community did not change, and its relative abundance was restored after the influent concentration decreased. On the contrary, the addition of TCE significantly changed the bacterial community, with Aminicenantes becoming the dominant phyla for co-metabolizing TCE and BTEX. Thus, TCE had a more significant influence on the bio-PRB than an increasing influent concentration, although these two stress conditions showed a similar degree of influence on the apparent removal rate of benzene and toluene. The present work not only provides a new method for accurately evaluating the biodegradation performance and microbial community in a bio-PRB, but also expands the application of compound-specific isotope analysis in the biological treatment of wastewater.
Production of superparamagnetic nanobiocatalysts for green chemistry applications
2016-04-23, Gasser, Christoph, Ammann, Erik, Schäffer, Andreas, Shahgaldian, Patrick, Corvini, Philippe
Immobilization of enzymes on solid supports is a convenient method for increasing enzymatic stability and enabling enzyme reuse. In the present work, a sorption-assisted surface conjugation method was developed and optimized to immobilize enzymes on the surface of superparamagnetic nanoparticles. An oxidative enzyme, i.e., laccase from Trametes versicolor was used as model enzyme. The immobilization method consists of the production of superparamagnetic nanoparticles by co-precipitation of FeCl2 and FeCl3. Subsequently, the particle surface is modified with an organosilane containing an amino group. Next, the enzymes are adsorbed on the particle surface before a cross-linking agent, i.e., glutaraldehyde is added which links the amino groups on the particle surface with the amino groups of the enzymes and leads to internal cross-linking of the enzymes as well. The method was optimized using response surface methodology regarding optimal enzyme and glutaraldehyde amounts, pH, and reaction times. Results allowed formulation of biocatalysts having high specific enzymatic activity and improved stability. The biocatalysts showed considerably higher stability compared with the dissolved enzymes over a pH range from 3 to 9 and in the presence of several chemical denaturants. To demonstrate the reusability of the immobilized enzymes, they were applied as catalysts for the production of a phenoxazinone dye. Virtually, 100 % of the precursor was transformed to the dye in each of the ten conducted reaction cycles while on average 84.5 % of the enzymatic activity present at the beginning of a reaction cycle was retained after each cycle highlighting the considerable potential of superparamagnetic biocatalysts for application in industrial processes.
Engineering efficient hole transport layer Ferrihydrite-MXene on BiVO4 photoanodes for photoelectrochemical water splitting: Work function and conductivity regulated
2022, Bai, Weihao, Zhou, Ye, Peng, Gang, Wang, Jinnan, Li, Aimin, Corvini, Philippe
Although great interest is focused on development of semiconductor photoanodes for efficient photoelectrochemical (PEC) water splitting, the pressing bottleneck to address the intrinsic charge transport for enhancement of PEC performance still remains to be resolved. Herein, hole transport layer (Fh-MXene) constructed by doping of MXene (Ti3C2) in Ferrihydrite (Fh) is loaded on BiVO4 photoanode. This novel BiVO4@Fh-MXene photoanode achieves high current density of 4.55 mA cm−2 at 1.23 V versus reversible hydrogen electrode (vs. RHE), exhibiting excellent photostability. From electrochemical analysis and density functional theory calculations, high PEC performance is ascribed to incorporation of Fh-MXene as hole transport layer, enhancing conductivity and water oxidation reaction. Notably, MXene can improve band alignment of BiVO4/Fh-MXene interface by tuning work function, which strengthens the built-in electric field for more efficient hole extraction. This work provides a simple method to design photoanodes with efficient charge transport layers for feasible PEC water splitting application.
Soil microbiomes divergently respond to heavy metals and polycyclic aromatic hydrocarbons in contaminated industrial sites
2022, Yang, Zhen-Ni, Liu, Ze-Shen, Wang, Ke-Huan, Liang, Zong-Lin, Abdugheni, Rashidin, Huang, Ye, Wang, Run-Hua, Ma, Hong-Lin, Wang, Xiao-Kang, Yang, Mei-Ling, Zhang, Bing-Ge, Li, De-Feng, Jiang, Cheng-Ying, Liu, Shuang-Jiang, Corvini, Philippe
Contaminated sites from electronic waste (e-waste) dismantling and coking plants feature high concentrations of heavy metals (HMs) and/or polycyclic aromatic hydrocarbons (PAHs) in soil. Mixed contamination (HMs + PAHs) hinders land reclamation and affects the microbial diversity and function of soil microbiomes. In this study, we analyzed HM and PAH contamination from an e-waste dismantling plant and a coking plant and evaluated the influences of HM and PAH contamination on soil microbiomes. It was noticed that HMs and PAHs were found in all sites, although the major contaminants of the e-waste dismantling plant site were HMs (such as Cu at 5,947.58 ± 433.44 mg kg−1, Zn at 4,961.38 ± 436.51 mg kg−1, and Mn at 2,379.07 ± 227.46 mg kg−1), and the major contaminants of the coking plant site were PAHs (such as fluorene at 11,740.06 ± 620.1 mg kg−1, acenaphthylene at 211.69 ± 7.04 mg kg−1, and pyrene at 183.14 ± 18.89 mg kg−1). The microbiomes (diversity and abundance) of all sites were determined via high-throughput sequencing of 16S rRNA genes, and redundancy analysis was conducted to investigate the relations between soil microbiomes and contaminants. The results showed that the microbiomes of the contaminated sites divergently responded to HMs and PAHs. The abundances of the bacterial genera Sulfuritalea, Pseudomonas, and Sphingobium were positively related to PAHs, while the abundances of the bacterial genera Bryobacter, Nitrospira, and Steroidobacter were positively related to HMs. This study promotes an understanding of how soil microbiomes respond to single and mixed contamination with HMs and PAHs.