Listen
7 Ergebnisse
Ergebnisse nach Hochschule und Institut
Publikation Organic solvent free PbI2 recycling from perovskite solar cells using hot water(Elsevier, 05.04.2023) Schmidt, Felix; Amrein, Meret; Hedwig, Sebastian; Kober-Czerny, Manuel; Paracchino, Adriana; Holappa, Ville; Suhonen, Riikka; Schäffer, Andreas; Constable, Edwin C.; Snaith, Henry J.; Lenz, MarkusPerovskite solar cells represent an emerging and highly promising renewable energy technology. However, the most efficient perovskite solar cells critically depend on the use of lead. This represents a possible environmental concern potentially limiting the technologies’ commercialization. Here, we demonstrate a facile recycling process for PbI2, the most common lead-based precursor in perovskite absorber material. The process uses only hot water to effectively extract lead from synthetic precursor mixes, plastic- and glass-based perovskites (92.6 – 100% efficiency after two extractions). When the hot extractant is cooled, crystalline PbI2 in high purity (> 95.9%) precipitated with a high yield: from glass-based perovskites, the first cycle of extraction / precipitation was sufficient to recover 94.4 ± 5.6% of Pb, whereas a second cycle yielded another 10.0 ± 5.2% Pb, making the recovery quantitative. The solid extraction residue remaining is consequently deprived of metals and may thus be disposed as non-hazardous waste. Therefore, exploiting the highly temperature-dependent solubility of PbI2 in water provides a straightforward, easy to implement way to efficiently extract lead from PSC at the end-of-life and deposit the extraction residues in a cost-effective manner, mitigating the potential risk of lead leaching at the perovskites’ end-of-life.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Rapid sequestration of perovskite solar cell-derived lead in soil(Elsevier, 08/2022) Schmidt, Felix; Ledermann, Luca; Schäffer, Andreas; Snaith, Henry J.; Lenz, MarkusEfficient and stable perovskite solar cells rely on the use of Pb species potentially challenging the technologies’ commercialisation. In this study, the fate of Pb derived from two common perovskite precursors is compared to cationic lead in soil-water microcosm experiments under various biogeochemical conditions. The rapid and efficient removal of Pb from the aqueous phase is demonstrated by inductively coupled plasma mass spectrometry. Sequential soil extraction results reveal that a substantial amount of Pb is associated with immobile fractions, whereas a minor proportion of Pb may become available again in the long term, when oxygen is depleted (e.g. during water logging). X-ray absorption spectroscopy results reveal that the sorption of Pb on mineral phases represents the most likely sequestration mechanism. The obtained results suggest that the availability of leached Pb from perovskite solar cells is naturally limited in soils and that its adverse effects on soil biota are possibly negligible in oxic soils. All three Pb sources used behaved very similar in the experiments, wherefore we conclude that perovskite derived Pb will have a similar fate compared to cationic Pb, so that established risk assessment considerations for Pb remain legitimate.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Crystallographic, optical, and electronic properties of the Cs2AgBi1–xInxBr6 double perovskite. Understanding the fundamental photovoltaic efficiency challenges(American Chemical Society, 19.02.2021) Lenz, Markus; Schade, Laura; Mahesh, Suhas; Volonakis, George; Zacharias, Marios; Wenger, Bernard; Schmidt, Felix; Kesava, Sameer Vajjala; Prabhakaran, Dharmalingam; Abdi-Jalebi, Mojtaba; Longo, Giulia; Radaelli, Paolo; Snaith, Henry; Giustino, FelicianoWe present a crystallographic and optoelectronic study of the double perovskite Cs2AgBi1–xInxBr6. From structural characterization we determine that the indium cation shrinks the lattice and shifts the cubic-to-tetragonal phase transition point to lower temperatures. The absorption onset is shifted to shorter wavelengths upon increasing the indium content, leading to wider band gaps, which we rationalize through first-principles band structure calculations. Despite the unfavorable band gap shift, we observe an enhancement in the steady-state photoluminescence intensity, and n-i-p photovoltaic devices present short-circuit current greater than that of neat Cs2AgBiBr6 devices. In order to evaluate the prospects of this material as a solar absorber, we combine accurate absorption measurements with thermodynamic modeling and identify the fundamental limitations of this system. Provided radiative efficiency can be increased and the choice of charge extraction layers are specifically improved, this material could prove to be a useful wide band gap solar absorber.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Deterioration of sandstones: Insights from experimental weathering in acidic, neutral and biotic solutions with Acidithiobacillus thiooxidans(Elsevier, 24.02.2020) Potysz, Anna; Schmidt, Felix; Lenz, Markus; Bartz, Wojciech; Zboińska, KatarzynaThe susceptibility of sandstones to deteriorative factors when used for construction requires detailed experimental evaluation. This study investigated the (bio)weathering behaviour of Lower-Silesian Cretaceous sandstones (quartz arenites) to quantify the deteriorative effect of bacterium Acidithiobacillus thiooxidans. For controls, ultrapure water (in undersaturated conditions) and sterile acidic medium (in abiotic acidic conditions pH 2.5) were used. Sandstone exposure to A. thiooxidans mimicked the extremely acidic conditions (pH up to 0.9) that may develop under long-term weathering, which promote microbial activity and acidic metabolite production. Element release was assessed using triple quadrupole inductively coupled plasma mass spectrometry (QQQ-ICP-MS) and identifying potential element donor minerals through scanning electron microscopy, coupled with energy dispersive spectrometer (SEM-EDS). The results demonstrated that sandstones were relatively susceptible to weathering, especially when exposed to aggressive acidic conditions, where the presence of bacteria apparently acts as an accelerating factor in deterioration. Based on Si release, sandstone degradation under biotic conditions was 0.27% within 86 days, whereas the dissolution achieved in ultrapure water did not exceed 0.02%. A highly pronounced weathering feature observed on sandstones was the dissolution of goethite and/or kaolinite cement, whereas quartz was less susceptible to weathering under the conditions studied. Bioweathering investigations may help solve deterioration issues in sandstone building materials.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Biodeterioration affecting efficiency and lifetime of plastic-based photovoltaics(Elsevier, 16.09.2020) Schmidt, Felix; Lenz, Markus; Schaeffer, Andreas; Zimmermann, Yannick; Alves dos Reis Benatto, Gisele; Kolvenbach, Boris; Krebs, FrederikThe low environmental impact of electricity generation using solar cells crucially depends on high energy-conversion efficiencies, long lifetimes and a minimal energy and material demand during production. Emerging thin-film photovoltaics such as perovskites on plastic substrates could hold promise to fulfil all these requirements. Under real-world operating conditions photovoltaic operation is challenged by biological stressors, which have not been incorporated for evaluation in any test. Such stressors cause biodeterioration, which impairs diverse, apparently inert materials such as rock, glass and steel and therefore could significantly affect the function and stability of plastic-based solar cells. Given that different photovoltaic technologies commonly use similar materials, the biodeterioration mechanisms reviewed here may possibly affect the efficiency and lifetimes of several technologies, if they occur sufficiently fast (during the expected lifetime of photovoltaics). Once the physical integrity of uppermost module layers is challenged by biofilm growth microbially mediated dissolution and precipitation reactions of photovoltaic functional materials are very likely to occur. The biodeterioration of substrates and seals also represents emission points for the release of potentially harmful photovoltaic constituents to the environment01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Renewable Energy from Finite Resources: Example of Emerging Photovoltaics(Schweizerische Chemische Gesellschaft, 2020) Schmidt, Felix; Schaeffer, Andreas; Lenz, MarkusRenewable energies, such as sunlight, wind and geothermal heat, are resources that are replaced rapidly by natural processes. However, wind, hydro and solar installations strictly require raw materials that are, in fact, not renewable. Many raw materials are already facing a supply shortage which cannot be easily overcome. This work reviews the problem of critical raw material (CRM) use in photovoltaics (PV) as an example and explains why supply cannot be easily increased to meet demand. We discuss whether there is indeed a 'struggle for elements' in a Darwinian sense, which ultimately leads to a 'survival of the fittest' race in renewable energy technology. In the case of PV, the perception of the definition of 'fittest' needs to change from that considering energy conversion efficiency alone to that which holistically considers net energy produced per emission under the premise that sufficient environmentally and socially acceptable raw material supply exists for renewable energies and all other sectors.01A - Beitrag in wissenschaftlicher ZeitschriftPublikation Renewable Energy from Finite Resources: Example of Emerging Photovoltaics(Schweizerische Chemische Gesellschaft, 01.11.2019) Schmidt, Felix; Lenz, MarkusRenewable energies, such as sunlight, wind and geothermal heat, are resources that are replaced rapidly by natural processes. However, wind, hydro and solar installations strictly require raw materials that are, in fact, not renewable. Many raw materials are already facing a supply shortage which cannot be easily overcome. This work reviews the problem of critical raw material (CRM) use in photovoltaics (PV) as an example and explains why supply cannot be easily increased to meet demand. We discuss whether there is indeed a 'struggle for elements' in a Darwinian sense, which ultimately leads to a 'survival of the fittest' race in renewable energy technology. In the case of PV, the perception of the definition of 'fittest' needs to change from that considering energy conversion efficiency alone to that which holistically considers net energy produced per emission under the premise that sufficient environmentally and socially acceptable raw material supply exists for renewable energies and all other sectors.01A - Beitrag in wissenschaftlicher Zeitschrift